Post-Winterization To-Do List โ€” What to Do After Your Calgary Sprinkler Blowout

Your sprinkler blowout is done. What now? These 8 steps take 10 minutes to complete after your J.G. Irrigation technician leaves โ€” and they protect your system all winter and make spring startup faster.

8 Steps After Your Calgary Sprinkler Blowout

Step Action Why It Matters
1 Confirm irrigation main shutoff is fully closed Any water in the system over winter risks freeze damage
2 Set controller to OFF or Seasonal Adjust to 0% Prevents accidental zone activation on a warm fall day
3 Check backflow preventer position Ball valves should be at 45 degrees, test cocks open โ€” confirm technician completed this
4 Insulate the backflow preventer if exposed In extreme cold (-25C+), an insulating cover provides extra protection for the body
5 Clear any debris from valve box lids Buried lids are harder to find in spring โ€” clear them now
6 Note any broken heads or issues from your blowout report Schedule repairs before spring startup โ€” J.G. Irrigation books faster in fall than spring
7 Book spring startup (do it now, not in April) J.G. Irrigation May spots fill by mid-April โ€” book from October for guaranteed timing
8 Save your blowout service report J.G. Irrigation provides written report โ€” reference it at startup to prioritize repairs
Should I insulate my backflow preventer in Calgary winter?

After a proper blowout with test cocks open, the backflow preventer has no standing water and does not need insulation for normal Calgary winters (-15C to -25C range). For extreme cold events (-30C and below), a foam insulating cover from a hardware store adds insurance. Never insulate before the blowout โ€” it does not substitute for removing the water. J.G. Irrigation: 587-433-4795.

Book Spring Startup Now โ€” While You Are Thinking About It

J.G. Irrigation May spots fill by April. Book from your phone right now. 587-433-4795.

Call 587-433-4795Book Now