Pre-Season Sprinkler Inspection Calgary โ€” What Gets Checked at Spring Startup 2026

A professional spring startup in Calgary is more than just turning on the water โ€” it's a comprehensive inspection that identifies any damage from the winter, adjusts heads and zones, and programs the controller for the new season. This guide covers exactly what J.G. Irrigation checks during a Calgary spring startup inspection.

Calgary spring irrigation startup Checklist โ€” 25-Point Inspection

Inspection Category What We Check
Backflow preventer Open, pressure-check, inspect for winter cracks, BFP test if required
Main valve manifold Check each zone valve actuates; inspect for freeze cracking; diaphragm condition
Sprinkler heads โ€” all zones Pop-up function, retract function, spray pattern, clogged nozzles, arc adjustment
Pipe system Check for pressure drops indicating leaks; listen for subsurface leaks
Controller / timer Battery check; program review; DST adjustment; smart weather data sync if applicable
Rain sensor Verify sensor is active and overriding controller during simulated rain test

J.G. Irrigation's spring startup cost in Calgary is $80-$130 and typically takes 45-75 minutes. Issues found during the inspection are quoted on-site so you can decide whether to repair immediately or schedule a follow-up visit. Starting the season with a professional inspection prevents the mid-summer failures that happen when small problems go unnoticed. Call 587-433-4795 to book your 2026 spring startup.

When should I book my Calgary irrigation spring startup?

Book your Calgary spring startup for May, when ground frost risk is essentially zero and the city watering season begins. Avoid running your system before May 1 as overnight temperatures can still dip below freezing in April. J.G. Irrigation takes spring startup bookings from March onwards โ€” book early to secure your preferred date. Call 587-433-4795.

Calgary Spring Irrigation Startup โ€” $80-$130 All-In

Call 587-433-4795View Startup Service